TecPro BP167 Single circuit waterproof beltpack, IP67 rated, 27-167

SKU: Tec 27-167
TecPro

BP167 - IP67 Rated Tecpro Beltpack

Designed for the offshore industry, the IP67 rated Tecpro BP167 beltpack has been designed to withstand harsh, wet weather conditions and to be operated with ease while wearing heavy gloves.

Back on dry land, the BP167 is also suitable for outdoor events where operators will be working in the rain.

The BP167 shares the same electronics as our popular Series 2 beltpacks. The electronics are housed within a robust aluminium case with sealed top and bottom plates.

The top plate is fitted with a rotary volume control for the headset and a 'Mic' On/Off button with latching and PTT operating modes. A red LED in the centre of the button illuminates when the mic is switched on. A momentary low level confidence tone indicates that the mic has been switched on or off.

If a 'Call' alert signal is received, the red LED in the Mic button flashes and low level audio tone is heard in the headset. The beltpack does not have a 'Call' button so alerts can’t be initiated.

The bottom plate supports a single IP rated Neutrik XLR 3-pin for linking to the intercom ring. To avoid a potential point of water ingress, there is no loop through connector, so daisy chaining of beltpacks is not possible. Headset connection is via an IP rated Neutrik XLR 4-pin.

A removable belt clip is secured to the back of the aluminium case by a circular stainless steel 'mushroom' anchor point.

The BP167 beltpack is a sealed unit. Adjustments to side-tone and audio alert levels should be carried out by a qualified technician.

NOTE: the IP67 rating should not be confused with ATEX certified systems which are designed for use in the vicinity of oil and gas platforms or where explosive atmospheres may be present.