Signet ML1 wall mounting counter hearing loop amp ONLY

Signet 100m x 2.5mm2 single core white loop cableLOOP4/W Single Core Loop Cable is used to transmit induction loop audio signal generated from SigNET ...

The standard flat foil cable supplied by Ampetronic is 18mm (0.71”) wide, with a copper section of 1.8mm².The construction of the cable is copper foil...

Signet 10m Belden 4 core cable use with outreach plates

Signet 12V 250mA Double Gang Power SupplyThe SigNET APV Outreach Plate PSU provides 12V power to SigNET Outreach plates.SigNET's Outreach Plate audio ...

Signet PDA XLR line level plate The APXL Outreach Input Plate accepts standard 3 pin XLR feeds from audio equipment such as stage or church mixing de...

A range of wall, ceiling, and desk mounting single gang input plates, 'Outreach' Plates are specifically designed to increase the audio input capabili...

Signet Tie clip/desk mic

Signet PDA Line level out outreach plate

Signet 3.5mm jack to double phono lead

Boundary microphonePart code: ACBMICThe ACBMIC is a directional electret boundary layer microphone. It is designed to be connected to unbalanced micro...

Signet Lectern mic A cardioid microphone, with a 275mm gooseneck, designed to be positioned on a lectern plinth. The microphone has two pre-drilled ...

FLAT3005 is a 100 metre reel of 1.5mm Flat Copper Cable for use under carpet and flooring coverings in Induction Loop System applications.Many install...

Signet PDA Small 'AFILS available' sticker (xxmm x xxmm)

Signet 50m Belden 4 core cable use with outreach plates

Signet PDA Overspill reduction phase shifter

Signet 25m Belden 4 core cable use with outreach plates

Signet 3.5mm plug to 6.35mm jack socket

Signet PDA XLR mic level plate The APXM Outreach Input Plate accepts balanced or unbalanced microphones with standard 3 pin XLR connectors. Includes ...