Audio Technica ATM350W Instrument Microphone w/ Woodwind Mount

SKU: ATM350W

Please allow 3-5 working days for Delivery

Audio Technica

The Audio Technica ATM-350W Cardioid Condenser microphone is designed to handle extreme pressure levels while delivering a crisp, clear and well-balanced sound. The cardioid polar pattern protects the microphone against feedback by reducing pick up of unwanted sounds from the rear and the included in-line power module features a switchable 80Hz high-pass filter to help control undesired low frequency noise.

The included AT8491W UniMount,, woodwind mount has a flexible hook and loop strap and specially designed contact points on the mount to minimise dampening of the instrument resonance whilst ensuring a secure fit. The AT8491W also includes the sturdy AT8490 UniMount,, 5 gooseneck attachment meaning your mic can placed in the perfect pickup spot for your woodwind instrument.

All ATM-350 instrument microphones come with a hard-shell zipped carry case to protect the microphone and included accessories.

Product Features

• Cardioid polar pattern to protect against feedback
• Pre-polarised condenser for crisp, clear and well balance sound
• 5,,rugged gooseneck manipulates into the prime pick-up position
• AT8491W UniMount,, woodwind mount easily attaches to any wind instrument
• Comes with in-line power module with switchable 80Hz high-pass filter
• Hard-shell zipped carry case included

Product Specifications

• Element:  Fixed-charge back plate, permanently polarized condenser
• Polar Pattern:  Cardioid
• Frequency Response:  40 , 20,000 Hz
• Low Frequency Roll Off:  80 Hz, 12 dB/octave
• Open Circuit Sensitivity:  ,49 dB (3.5 mV) re 1V at 1 Pa
• Maximum Input Sound Level:  159 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range:  130 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio:  65 dB, 1 kHz at 1 Pa
• Phantom Power Requirements:  11, 52V DC, 3.5 mA typical
• Switches:  Flat, roll-off
• Weight:  
  • Microphone:  14.5 g (0.5 oz)
  • Power Module:  90 g (3.2 oz)
• Cable:  4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13) diameter, 2-conductor shielded cable with HIROSE HR10-type connector
• Dimensions:  
  • Microphone:  37.8 mm (1.49'') long, 12.2 mm (0.48'') maximum body diameter
  • Power Module:  92 mm (3.62) long, 18.9 mm (0.74) diameter
• Output Connector:  Power Module:  Integral 3-pin XLRM-type
• Accessories Included:
  • ATM350a cardioid condenser microphone
  • AT8543 power module
  • AT8491W UniMount,, woodwind mount
  • AT8490 UniMount,, 5 gooseneck
  • AT8468 violin mount (hook-and-loop fastener)
  • Protective carrying case