Audio Technica AT4049B Omnidirectionalectional Condenser

SKU: AT4049b

Please allow 3-5 working days for Delivery

Audio Technica

This versatile modular microphones may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the AT4049b is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to- capture instruments.

The AT4049b consists of two modular subassemblies: an AT4900b-48 body and an AT4049b-EL omnidirectional head capsule (both available separately). Additional interchangeable capsules are available in cardioid (AT4051b-EL) and hypercardioid (AT4053b-EL).

Product Features

• Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
• Omnidirectional polar pattern provides maximum ambient pickup
• Direct-coupled, balanced output results in a clean signal even under high-output conditions
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Switchable 80 Hz hi-pass filter and 10 dB pad
• Rugged turned-brass microphone housing for enduring dependability
• State-of-the-art design and manufacturing techniques ensure compliance with Audio-Technica's stringent consistency and reliability standards

Product Specifications

General

• Element:  Externally polarised (DC bias) condenser
• Polar Pattern:  Omnidirectional
• Frequency Response:  20 - 20.000 Hz
• Open Circuit Sensitivity:  -34 dB (19.9 mV) re 1V at 1 Pa
• Impedance:  50 ohms
• Maximum Input Sound Level:  145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
• Low Frequency Roll Off:  80 Hz, 18 dB/octave
• Switches:  Flat, roll-off; 10 dB pad (nominal)
• Dynamic Range:  129 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio:  78 dB, 1 kHz at 1 Pa
• Phantom Power Requirements:  48V DC, 4.8 mA typical
• Output Connector:  Integral 3-pin XLRM-type

Physical

• Weight:  130g
• Dimensions:  155.0 mm (6.10) long, 21.0 mm (0.83) maximum body diameter