Doughty 3 Way 90 Degree Elbow A three way enclosed 90 degree corner joint. Tube Diameter: 48mm

Doughty Pipeclamp Long Tee A 90 degree connection between two tubes. This Pipeclamp can be used to join two tubes in the top of the twin grub sc...

Doughty Pipeclamp Four Way Cross A four way cross that enables the vertical to pass through the centre of the fitting with the four horizontal join...

Doughty Adjustable Flange A complete locating swivel. The swivel has a travel of approximately 85 degrees in each direction.

Doughty Pipe To Pipe U Bolt And Plate The large 'U' bolt is an inexpensive means of clamping two tubes together. Fits Tubes: 48 - 51mm Weight...

Doughty Pipeclamp Ground Socket A ground socket which is cast into concrete to create a socket that is flush with the ground level. Tube Diamete...

Doughty Outside Corner A 90 degree corner with an inside tube. Tube Diameter: 48mm

A galvanised steel fitting, designed to provide a 90 degree tee connection between two tubes. This fitting cannot be used to join two tubes together....

Doughty Pipeclamp Two Socket Crossover A 90 degree joint between a vertical and two horizontals. The vertical must remain continuous with the cr...

Doughty Pipeclamp Combination Socket Tee A combination fitting designed for use in the construction of racking systems. The fitting enables the ...

Doughty Speedrail Two Socket Cross A 90 degree joint between a vertical and two horizontals. The vertical must remain continuous with the cross ...

Heavy duty stand off pipe to wall bracketconstructed from steel with a matt black powder coat finish. Designed for the installation of lighting bars (...

Doughty Straight Pipe To Pipe Coupler (48mm) A two piece pipe to pipe straight coupler. Finish: Bright Zinc Plate. Tube sizes:38mm & 48mm.

Doughty Adjustable Crossover Used in pairs to create angle between 85 - 235 degrees. A central through tube is required to join the fitting to c...

Doughty Angled Cross (10 - 35) A 10 - 35 Angle Cross. This can be used to connect a 90 upright between two tubes that are at an angle, i.e. a ha...

Doughty Pipeclamp Crossover 90 Degree (Reducing 48.3 x 33.7) A 90 degree crossover fitting. Ideal applications are for racking systems or offset gu...

Doughty Pipeclamp Clamp On Tee

Doughty Pipeclamp Corner Swivel Combination 90 Degree (Male) A double male fitting with the lugs at 90 degrees to each other. 10.5mm holes. T...

Doughty Pipeclamp Railing Side Support Horizontal (Size 2 Only) Structural palm base fixing. 14mm mounting holes. Tube Diameter: 48mm